You are purchasing a NEW:
1 Half Tire SPIKE Collar vinyl Kit.
These NEW Tire Spikes were custom cut out by the owner of the Predator Corvette. Its very easy to install, fits all vehicles.
1. Qty 4, 4" x 9.5" Spikes. (each spike is separate from each other)
2. Qty 4, 1.75" x 5.5" Spikes. (each spike is separate from each other)
These Tire Spikes are made of vinyl, Carbon Fiber vinyl is NOT REAL CARBON FIBER.
When installing the Tire Spikes, make sure the surfaces that you apply the material to must be smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination.
We are not responsible for improper installation. If you have any questions before you purchase, please email us.
This vinyl can be installed using 3M Primer 94 and 3M Edge sealer, these are recommended by 3M vinyl wrap training class, these products will promote adhesion and add life to your vinyl. We would highly suggest using a 3M primer 94 or professional installation.
1. Make sure the surfaces that you apply the material to is smooth, non porous, and thoroughly cleaned from dust, grease, or any other contamination.
2. You can apply the Tires Spikes anywhere you would like and space them as you like. The pictures have them spaced by 1/2". There is 1.5" at the end of the spike that goes into the tire area, you will need to trim in some areas depending on the car.
3. When you have the location you want to put the Spikes, Peel off the backing from the decal (NOTE: pull off slowly.) exposing the adhesive side. Start from one side, stick the decal to the surface, then using a squeegee or a credit card wrapped in cloth to make sure it does not scratch the decal, start working your way to the other side of the decal applying pressure with the squeegee or credit card in order to remove the air bubbles. Be sure to apply pressure on the edges to make sure it is securely stuck on correctly.
4. When the vinyl has been applied, remove the clear film on the top and trim excess.
5. If you still have air bubbles under the decal, use the squeegee or credit card to work the bubbles out. Start from the middle of the decal and work them out to the edge.
Shipping in the USA: Free Shipping.
International Shipping: Please email us before you order to calculate your shipping charges.
Shipping is calculated by your Country and zip codes. USPS Priority International (6-10 Business days)
International Buyers: We don't have knowledge of other country's laws outside of the USA so please make sure that your postal service will allow the item into your country before buying them. We are not responsible for custom taxes or levies your country may charge you.